Silvercrest SEM 1100 D3 Instrucciones De Uso página 24

Malfunction
The milk does not froth .
The pump stops during
operation, the "Espres-
so" control lamp t
flashes .
All lamps 5 t z flash
simultaneously .
Disposal of the appliance
The adjacent symbol of a crossed-out dustbin means that this appliance is subject
to Directive 2012/19/EU . This directive states that this appliance may not be
disposed of in the normal household waste at the end of its useful life, but must
be taken to specially set-up collection locations, recycling depots or disposal
companies .
The disposal is free of charge for the user . Protect the
environment and dispose of this appliance properly . .
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product .
The product is recyclable, subject to extended producer responsibility and is
collected separately .
SEM 1100 D3
Cause
• The milk is not cold enough .
• The milk frother 0 is dirty .
• The pump stops after about 3
minutes of operation to prevent
overheating .
• The temperature for the prepa-
ration of a perfect espresso is
too high .
Solution
• Use milk from the
refrigerator .
• Clean the milk frother 0 .
• Allow the appliance to
cool down before you
use it again .
• Wait until the machine
has cooled down and the
"Espresso" control lamp
t lights up continuously .
GB │ IE │ 21 ■