Step 1: Position airbag / carrying
system
Step 3: Place the airbag between
the net and the carrying system
Step 5: Connect the press studs in
the arm area
Step 7: Connect the press studs on
the lower part, depending on the
colour.
22
MAT-BA-0229-03_20240305.indd 22
MAT-BA-0229-03_20240305.indd 22
Step 2: thread the control modu-
le through the hole in the carry-
ing system
Step 4: Connect the press studs
on the head section to match the
colour
Step 6: close the zips* in the
head area
Step 8: Close the bottom zips on
both sides.
26.03.2024 11:10:01
26.03.2024 11:10:01