Klarstein HAVASIA UV 6 Manual página 42

EN
42
BEFORE FIRST USE
Be sure to check the following points before starting the dishwasher for the first
time:
• The dishwasher is standing firm and level.
• The inlet tap is open, firmly attached and is not leaking.
• The mains cable is securely plugged into the socket.
• The power is on.
• The packaging material and all stickers have been completely removed.
FILLING THE RINSING SALT DISPENSER
• Only use rinsing salt that is suitable for dishwashers. All other types of salt,
such as table salt, can damage the appliance. The manufacturer is not liable
for damage caused by using the wrong rinsing salt.
• Fill in the rinsing salt before starting a complete rinsing programme. This
prevents grains of salt or salt water from remaining at the bottom of the
machine and causing corrosion.
The rinsing salt chamber is located under the basket and is filled as follows:
• Remove the basket and unscrew the lid of the salt container (1).
• Before the first wash, add one litre of water to the salt container.
• Put the funnel provided into the salt container and add about 1 kg of rinsing
salt (2). It is normal for some water to leak out of the container.
• Screw the cover back on clockwise.
• Normally, the flushing salt indicator light goes out 2-6 days after filling, when
the salt has completely dissolved. Start a washing programme immediately
after filling. Otherwise the filter system, the pump or important parts could be
damaged by salt water.