Klarstein HAVASIA UV 6 Manual página 54

EN
54
Cleaning the spray arms
You can remove the spray arm for
regular cleaning. Grasp the spray arm
in the middle and pull it off. Wash it
off under running water and put it
back in.
After insertion, check that the spray
arms can rotate freely. If not, check
that they have been reinserted
correctly.
How to care for your dishwasher properly
• After each wash: Close the water supply and leave the door slightly open to
allow the humid air to escape.
• Unplug: Always unplug the appliance before cleaning or performing
maintenance on it.
• No solvents or abrasives: Do not use any solvents or abrasives to clean the
housing or the rubber seals. Only use a soft cloth and a little soapy water for
cleaning. To remove stains or streaks, use a damp cloth with a little vinegar or
a special cleaner for dishwashers.
• If you will not use it for a longer period of time: We recommend that you run
a programme without dishes. Then unplug the appliance, close the water
supply and leave the door slightly open so that the seals last longer and no
unpleasant odours form in the appliance.
• Move the unit: If you need to move the unit, try to keep it upright. If there is
no other way, you can also tip it onto its back.
• Door seals: One cause of unpleasant odours is food residue in the door seals.
Therefore, clean the seals regularly with a damp sponge.