Klarstein HAVASIA UV 6 Manual página 44

EN
44
FILLING THE RINSE AID DISPENSER
The rinse aid is released during the last rinse cycle and prevents the water from
forming drops on the dishes, which can leave stains and streaks. It also improves
drying by making the water roll off the dishes. This dishwasher is designed for the
use of liquid rinse aids.
Note: Only use branded rinse aid for dishwashers. Never fill the rinse aid
dispenser with other substances such as dishwasher detergent or liquid
detergent. This would damage the device.
Refilling the rinse aid dispenser
If the rinse aid warning light (
the amount by looking at the colour of the visual level indicator next to the lid.
When the rinse aid tank is full, the display is completely dark. The size of the dark
spot decreases as the amount of rinse aid decreases. The rinse aid level should
never be less than 1/4.
When the amount of rinse aid decreases, the size of the black dot on the rinse aid
level indicator changes as shown below.
Full 3/4 full
To top up the rinse aid
1
Remove the lid of the rinse aid
dispenser by turning it anticlockwise.
) on the control panel is not lit, you can estimate
1/2 full 1/4 full
Carefully fill the rinse aid into the
dispenser, making sure that it does
not overflow.
Empty
2