Klarstein HAVASIA UV 6 Manual página 58

EN
58
Problem
The glass is fogged up.
Black or grey stripes on
dishes
Detergent residues in
the chamber.
Error codes
For some faults, the display shows an error code to warn you: In the event of some
faults, the display shows an error code to warn you. In these cases, call in specialist
personnel.
WARNING
Risk of electric shock or other personal injury!
Do not repair the appliance yourself. The dishwasher may only
be repaired by qualified personnel. The repair must be carried
out professionally.
Code Meaning
E1 Water supply disrupted.
E3 The water temperature
is not reached.
E4 Water leak.
Ed
Fault in communication
between main circuit
board and display
circuit board
In case of repair, please contact a qualified repair service in your area Spare parts
for the item are available until 31.12.2028.
Potential cause
Combination of soft
water and too much
detergent.
Aluminium parts have
rubbed against the
dishes.
The dishes are
obstructing the
dissolution of the
detergent.
Potential cause
The tap is not open, the water supply is
interrupted or the water pressure is too
low.
The heating element is broken. Contact a
specialist company.
Part of the dishwasher is leaking. Turn
off the main tap and call a professional.
If there is still water in the tub after the
end of the programme, remove it before
restarting the dishwasher.
Open circuit or interrupted wiring for
communication. Contact a specialist
company.
Solution
Use less detergent
and use the shortest
programme to wash and
clean the glass.
Use a mild abrasive
cleaner.
Load the dishes carefully
into the dishwasher.