Klarstein HAVASIA UV 6 Manual página 47

LOADING THE DISHWASHER CORRECTLY
Unsuitable crockery and cutlery
Unsuitable crockery/cutlery
• Cutlery with wooden, horn or
mother-of-pearl handles.
• Heat-resistant plastic tableware.
• Older cutlery with glued parts that
are not heat resistant.
• Coated cutlery or crockery.
• Things made of tin and copper.
• Crystal glass
• Things made of non-stainless steel
• Wooden dishes
• Plastic crockery and cutlery
What you should bear in mind when loading
Remove larger food scraps. Soak burnt-on residues in pans beforehand. It is
not necessary to rinse the dishes until clear beforehand. Place the items in the
dishwasher as follows:
• Place cups, glasses, pots and pans in the dishwasher with the inside facing
down.
• You should load curved objects standing up so that the water can run off.
• Load the objects inside the device in such a way that they cannot fall over.
• Make sure that the spray arms can rotate freely and are not obstructed by
dishes or protruding objects.
• Do not wash small items in the dishwasher as they could easily fall out of the
basket.
• Make sure that dishes and cutlery are not overlapping or covering each other.
• To avoid glass breakage, glasses must not touch each other.
• Load large items that are difficult to clean into the basket.
• Long and sharp objects must be placed horizontally in the basket to avoid
injury.
• For best results, do not overload the dishwasher.
Notes on the end of the programme
CAUTION
Risk of burns! The parts are very hot after rinsing! To avoid
damage, do not remove glasses and cutlery from the dishwasher
until about 15 minutes after the programme has ended.
Conditionally suitable crockery and
cutlery
• Certain types of glass, as they can
become cloudy over time.
• Silver and aluminium parts, as
they can change colour over time.
• Glazed crockery, as the glaze
disappears over time the more
often you wash it.
EN
47