Descargar Imprimir esta página

AL-KO SOLO CS 3635 Traducción Del Manual Original De Instrucciones página 37

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
Safety instructions
Use machines only with specifically des-
ignated battery packs. Use of any other bat-
tery packs may create a risk of injury and fire.
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a con-
nection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not use a battery pack or tool that is
damaged or modified. Damaged or modi-
fied batteries may exhibit unpredictable be-
haviour resulting in fire, explosion or risk of
injury.
Do not expose a battery pack to fire or ex-
cessive temperature. Exposure to fire or
temperature above 130°C may cause explo-
sion.
Follow all charging instructions and do
not charge the battery pack or machine
outside the temperature range specified in
the instructions. Charging improperly or at
temperatures outside the specified range
may damage the battery and increase the
risk of fire.
3.1.6
Service
Have your machine serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety
of the machine is maintained.
Never service damaged battery packs.
Service of battery packs should only be per-
formed by the manufacturer or authorized
service providers.
3.2
Safety instructions for chain saws
General chain saw safety warnings
Keep all parts of the body away from the
saw chain when the chain saw is operat-
ing. Before you start the chain saw, make
sure the saw chain is not contacting any-
thing. A moment of inattention while operat-
ing chain saws may cause entanglement of
your clothing or body with the saw chain.
443698_a
Always hold the chain saw with your right
hand on the rear handle and your left
hand on the front handle. Holding the chain
saw with a reversed hand configuration in-
creases the risk of personal injury and should
never be done.
Hold the chain saw by insulated gripping
surfaces only, because the saw chain may
contact hidden wiring. Saw chains contact-
ing a "live" wire may make exposed metal
parts of the chain saw "live'" and could give
the operator an electric shock.
Wear eye protection. Further protective
equipment for hearing, head, hands, legs
and feet is recommended. Adequate pro-
tective equipment will reduce personal injury
from flying debris or accidental contact with
the saw chain.
Do not operate a chain saw in a tree, on a
ladder, from a rooftop, or any unstable
support. Operation of a chain saw in this
manner could result in serious personal inju-
ry.
Always keep proper footing and operate
the chain saw only when standing on
fixed, secure and level surface. Slippery or
unstable surfaces may cause a loss of bal-
ance or control of the chain saw.
When cutting a limb that is under tension,
be alert for spring back. When the tension
in the wood fibres is released, the spring
loaded limb may strike the operator and/or
throw the chain saw out of control.
Use extreme caution when cutting brush
and saplings. The slender material may
catch the saw chain and be whipped toward
you or pull you off balance.
Carry the chain saw by the front handle
with the chain saw switched off and away
from your body. When transporting or
storing the chain saw, always fit the guide
bar cover. Proper handling of the chain saw
will reduce the likelihood of accidental con-
tact with the moving saw chain.
Follow instructions for lubricating, chain
tensioning and changing the bar and
chain. Improperly tensioned or lubricated
chain may either break or increase the
chance for kickback.
Cut wood only. Do not use chain saw for
purposes not intended. For example: do
not use chain saw for cutting metal, plas-
tic, masonry or non-wood building materi-
37

Publicidad

loading