Descargar Imprimir esta página

AL-KO SOLO CS 3635 Traducción Del Manual Original De Instrucciones página 48

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
GB
Malfunction
Engine does not start.
The chain bar and saw chain
become hot when running.
Generation of smoke.
Engine running, but the saw
chain does not move.
Only sawdust is thrown out,
rather than wood chips. The
chain saw has to be pushed
through the wood.
Appliance vibrates unusually.
10 TRANSPORT
WARNING! Danger of fatal injury and
danger of extremely severe injury. During
transport, a running saw chain can lead to ex-
tremely serious and even fatal injury.
Never carry and transport the chain saw with
the saw chain running.
Before transporting, carry out the measures
mentioned above.
Before transporting, carry out the following mea-
sures:
1. Switch off the chain saw and remove the re-
chargeable battery.
2. Fit the chain guard.
3. Carry the chain saw only at the bow handle.
Guide rail and saw chain should be facing to
the rear.
4. In vehicles: Secure the chain saw against tip-
ping over, damage and leakage of chain oil.
48
Cause
No battery voltage present.
Overload protection has
switched off.
Chain brake engaged.
The saw chain is tensioned
too tightly.
Oil tank is empty.
The oil entry hole and/or
groove of the chain bar are
dirty.
The saw chain is tensioned
too tightly.
Appliance errors
The saw chain is blunt.
Appliance errors
able battery is more than 100 Wh. Therefore, ob-
serve the following transport instructions.
The Li-ion rechargeable battery contained in the
appliance is subject to the hazardous goods law,
but can be transported under simplified condi-
tions:
In both cases, it is essential to take the mandato-
ry precautions mentioned above to prevent any
leakage of the contents. In other cases, it is es-
sential to comply with the regulations of the haz-
ardous goods law. In the case of non-compli-
Remedy
Have the power supply checked by
a qualified electrician.
Wart until the overload protection re-
establishes the power supply.
Release the chain brake.
Reduce chain tension.
Replenish the saw chain oil.
Check the oil tank for damage.
Clean the oil entry hole and groove
of the chain bar.
Reduce chain tension.
Contact a service centre of the man-
ufacturer.
Sharpen the saw chain or contact
one of the manufacturer's service
centres.
Contact a service centre of the man-
ufacturer.
NOTE The nominal energy of the recharge-
The rechargeable battery can be transported
on public roads by the private user without
further conditions provided it is packaged for
retail sale and the transport serves personal
purposes.
Commercial users who carry out the trans-
port in connection with their main activity
(e.g. delivery from and to building sites, or
demonstrations) can also take advantage of
this simplification.
Transport
CS 3635

Publicidad

loading