QJMOTOR SRT 700 Manual Del Usuario página 19

When the switch is moved to the " " position, the
left and right turn signal lamps stop flashing.
3 Electric start button
Press the electric start button, the electric motor
runs, and the engine is started.
4 Throttle control grip
The throttle control grip is used to control the engine
speed. To speed up, turn the handle toward you,
and release the handle to slow down.
5 Front brake lever
When front braking, slowly apply the brake grip on
the right handlebar.
6 Front brake grip adjuster
Front brake grip position can be
adjusted by ring nut adjustment
knob position as required for
operator comfort. To adjust one of the four optional
positions, just gently move the front brake lever hor-
izontally to the front, and then rotate the ring nut
adjuster to align with the arrow (A) to adjust the
desired position. The throttle control grip is the far-
thest, and the position 4 front brake lever is the clos-
est to the throttle control grip.
Refueling the fuel tank
When the fuel indicator on
the instrument flashes, it
is time to refuel. When
refueling, first open the
fuel tank cover dust cover
1, then insert the fuel
tank key and turn it clockwise, together with the key,
the fuel tank cover can be pulled open. After adding
fuel, when you want to close the fuel tank cap,
please align the guide pin of the fuel tank cap, and
then press down, you can close the fuel tank cap,
remove the key when you hear the lock sound, and
close the fuel tank cap dust cover.
The fuel tank should not be overfilled, and the fac-
tory recommends that the refueling amount is 90%
of the fuel tank volume. When refueling, please do
not exceed the specified position of the refueling
upper limit shown in the figure below, and do not
splash the fuel on the hot engine, otherwise it will
cause the motorcycle to run abnormally or cause
dangerous accidents.
14