Descargar Imprimir esta página

QJMOTOR SRT 700 Manual Del Usuario página 45

Ocultar thumbs Ver también para SRT 700:

Publicidad

Idiomas disponibles

Idiomas disponibles

some metal substances. Please keep the ABS
wheel speed sensor clean and free of foreign mat-
ter. Adhesion of foreign matter will cause damage to
the ABS wheel speed sensor.
If the ABS system fails, please contact the sales
department in time.
Storage Guidelines
Store
If you want to store it for a long time, you need to
take certain maintenance measures to reduce the
impact of long-term storage of the motorcycle on its
quality.
1. Change the oil.
2. Lubricate the drive chain.
3. Drain the fuel tank and fuel injection unit as
much as possible.
Notice
Gasoline can deteriorate when stored in the tank
for a long time, and such oil may cause difficulty in
starting.
Warning
Gasoline is highly flammable and can explode
under certain conditions. Do not smoke or allow
sparks nearby while draining fuel.
4. Remove the spark plug and inject 1 spoon (15 -
3
20cm
) of clean oil into the cylinder, then start
the engine several times to distribute the
injected oil to every part of the cylinder, and then
reinstall the spark plug.
Notice
When turning the engine, the ignition switch should
be in the "off (
)" position, and the spark plug
should be grounded in the cable cover to prevent
damage to the ignition system.
5. Remove the battery and store it in a place pro-
tected from freezing and direct sunlight.
6. Wash and dry the motorcycle. Wax all painted
surfaces.
7. Inflate the tire to the proper tire pressure. Place
the motorcycle on the block so that both tires are
off the ground.
40

Publicidad

loading

Este manual también es adecuado para:

Srt 700 x