QJMOTOR SRT 700 Manual Del Usuario página 40

filled with activated carbon particles that can absorb
vapor, which can effectively inhibit the volatilization
of excess fuel vapor into the atmosphere, so as to
achieve the purpose of saving fuel and protecting
the environment.
Removal of radiator water pipe clamp
The non-removable
end of the radiator
water pipe adopts a
disposable clamp,
and the frequently
disassembled end adopts a plate clamp. When the
clamp is disassembled, the old disposable clamp
cannot be reused, but the plate clamp can be reused.
In addition, special clamp pliers 1 are required to
refit the clamp 2, otherwise the clamp will not be
assembled in place, causing vehicle failure.
Fuel injector and oil circuit
Fuel pump 1, and the fuel enters the fuel injector 3
from one port of the fuel pump through the fuel filter
2, and finally injects the oil and gas into the engine
intake pipe.
For the connection method of the oil inlet and return
pipes, please follow the diagram on the right.
Parts lubrication
Proper lubrication is
i m p o r t a n t t o k e e p
every working part of
your motorcycle func-
t i o n i n g p r o p e r l y,
extending its life and
driving safely. After
driving for a long time
or after the motorcy-
cle has been wetted
by rain or washed,
we recommend that
you do a lubricating
maintenance on the
motorcycle. The spe-
cific lubrication and
maintenance points
are shown in the fol-
lowing figure:
35