Nordcap MORETTI FORNI P Serie Manual Instrucciones página 24

Ignitors, Detector, and Flame Control
deteriorate rapidly
The burner block LED switches on
6 LIST OF SPARE PARTS
Index of plates
Plate A Baking chamber assembly
Plate B Leavening compartment assembly
Plate C Baking chamber wiring diagram
Plate D Baking chamber wiring diagram
Plate E Baking chamber wiring diagram (for Australia only).
Plate F Leavening compartment wiring diagram
INSTRUCTIONS FOR ORDERING SPARE PARTS
Orders for spare parts must contain the following information:
- Oven serial number
- Oven type
- Name of part
- Number required
Heat is reverberating in the front and
side areas of the oven
Incorrect gas supply pressure
No Reset signal is coming from the
electronic board relay PR to the
flame control CF
Flame control CF failure
Solenoid failure
UK/11
Make sure that the exhaust pipe is
correctly fitted and that the draft is
efficient
Make sure that the gas and supply
pressures are as set in TAB.1 of the
instruction booklet (for the country of
use).
Make sure all connections from the
electronic board PR to the flame
control CF are efficient and that there
are no damaged cables
Check the correct operation of the
flame control CF and replace, if
necessary
Check the correct operation of the
solenoid and replace, if necessary