EN
I T
No water in tank during ESPRESSO supply phase
1. Fill the water tank up to the indicated MAX level;
2. Press the selected button again to keep on supplying.
No water in tank during LONG ESPRESSO
supply phase
1. Fill the water tank up to the indicated MAX level;
2. Press the selected button again to keep on supplying.
Stand-by
Stand-by mode after 9 minutes
• The machine can be set to the stand-by mode manually,
first of the 9 minutes' time, by keeping both buttons
pressed down for at least 3 seconds
Coffee dose programming
1. Press and hold one of the two coffee delivery buttons
for at least 3 seconds.
2. The selected button will flash.
3. Once the desired amount of coffee has been obtained,
stop supply by releasing the button.
Used capsule drawer filled
1. Switch-on/supply buttons lights on with white light
and blinking fast.
2. Empty the spent capsule drawer and press one of the
power on/supply buttons to reset the machine.
INDICATOR LIGHTS
40
3 sec.
3 sec.