LAVAZZA A MODO MIO Jolie&Milk Instrucciones De Uso página 58

EN I T
Press one of the supply buttons then supply one cup (ap-
proximately 2 fl oz /60 ml) of descaling solution. Allow
the descaling solution to work for about 15-20 seconds.
During breaks, empty the container used to collect the
solution.
Repeat the steps described in points
water tank is completely empty.
Proceed with the rinsing cycle.
MAINTENANCE AND CLEANING
and until the
58
Rinsing cycle
Remove the water tank, rinse and wash it accurately.
Fill it with drinking fresh non-carbonated water up to the
MAX level.
Fit the tank with the fresh water back into the machine.
Place a suitable container under the spout.
Press one of the supply buttons then supply the full con-
tent of the tank.
Empty the container and place it again under the dis-
penser.
Upon completion of the rinsing cycle, perform one more
rinsing cycle.
Remove the water tank, rinse and wash it accurately.
Fill it with drinking fresh non-carbonated water up to the
MAX level.
Put the tank back in place on the machine.
Clean the machine by means of a moist, soft cloth.
After cleaning the machine, the descaling process will be
over. The machine will be ready for use.