EN
I T
Do not remove the milk frother from the base before
completing the cycle.
After about 1-2 seconds, the appliance sounds a brief
acoustic signal.
The multifunction button comes on with white light
flashing.
The appliance starts the preparation.
The whisk process stops automatically when milk is
warm enough.
The appliance emits a double beep to indicate the end
of the frothing cycle.
The multifunction button turns off.
Remove the milk frother from the base.
PREPARATION OF MILK-BASED RECIPES
Open the lid and pour the frothed milk into the cup.
Make sure the whisk is in the milk frother while milk is
poured into the cup.
Ensure the appliance is disconnected from the power
outlet and that it has cooled down before cleaning.
For more detailed information, refer to "MAINTE-
NANCE AND CLEANING".
TEMPORARY OR FINAL INTERRUPTION OF
THE CYCLE
To stop preparation, press the multifunction button
again.
To resume preparation, press the multifunction button
again.
If the milk is sufficiently hot at the moment of the inter-
ruption of the process, the appliance will not be able to
be restarted.
The multifunction button will come on with red light flashing.
52