LAVAZZA A MODO MIO Jolie&Milk Instrucciones De Uso página 44

E N I T
The machine rear features two outlets that can be used
for the power cord. You should use the most suitable
outlet for your needs.
Fit the supply plug into the power outlet.
Press one of the switch-on/supply buttons to switch the
macchine on.
The coffee machine starts the heating cycle. The switch-
on/supply buttons will start blinking to a light white.
MACHINE SETTING
During the heating cycle, you can book the drink, pressing
one of the switch-on /supply buttons. The drink will be
released after the end of the heating
The machine will be ready for use when the switch-on/
supply buttons light up to a steady white light white
light.
At first power-on, supply at least 17.5 fl.oz (0.5 litre) of
water without capsule placing a container under the cof-
fee spout.
STAND-BY FUNCTION
To ensure the energy conservation the machine automati-
cally passes to the stand-by mode after 9 minutes of not
being used.
The machine can be set to the stand-by mode manually,
first of the 9 minutes' time, by keeping both buttons
pressed down for at least 3 seconds. This mode is indicat-
ed by the switching off of the buttons.
The machine can be reactivated by pressing the buttons
again.
44
cycle.
>
3
SEC