AQUA SPHERE VSP100 Manual De Instrucciones página 10

The pump should be permanently connected to either a circuit breaker, 2-pole timer or 2-pole
relay. If AC power is supplied by a GFCI circuit breaker, use a dedicated circuit breaker 3-that
has no other electrical loads.
Connect the pump permanently to a circuit. Make sure no other lights or appliances are on
the same circuit.
The field wiring compartment has a 1/2" NPT threaded conduit port for the liquid tight fitting.
The bonding lug should be used to bond the motor frame to the equipment pad.
10