AQUA SPHERE VSP100 Manual De Instrucciones página 14

Remember that the duration allowed for SPEED 3 will be limited to the remaining time in a
24 hour day. Any time in the 24 hour day not programmed into SPEEDs 1-4, the pump will
remain in a stationary state. [SPEED 1 + SPEED 2 + SPEED 3 +SPEED 4 <24 Hours ]
14. Press the Start/Stop button and ensure the LED is lit. The pump is now on and will run the
custom user-programmed schedule.
If the pump has been stopped via the Start/ Stop button, the pump will not run until the pump
is turned back on by the Start/Stop button. If the Start/Stop LED is illuminated then the pump
is on and will run the programmed schedule.
Figure 1 Setting Speed
Figure 3 Setting Duration
14
Figure 2 Setting Start Time