KAYAK
User's Manual
• A recreational vessel designed for use on internal waterways with an expected wind strength reaching Grade
4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres/12 inches inclusive, with
occasional waves up to 0.5 metres/20 inches of height caused e.g. by vessels passing by.
• The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
• Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your first vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenan-
ce and control prior to your first individual use of the vessel so that it
is safe and comfortable. Your dealer or the National Yacht Federation
or club will recommend you appropriate training courses or qualified
instructors.
Do not pull off until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your ve-
ssel and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.
1. Table of Specifications
(indicative values)
Length (cm) [ft.-in.]
Width (cm) [ft.-in.]
Number of air chambers
Approximate folded product dimensions (cm) [in.]
External dimensions of carton (cm) [in.]
Maximum operational pressure - side tube
Weight (kg) [lbs.]
Load (kg) [lbs.]
Maximum number of people
Draught (cm) [in.]
The highest anchor above surface (cm) [in.]
2. Technical Description
– Refer to Fig. 1
1 Side tube
2 Bottom
3 PUSH/PUSH valve - enables inflation/deflation, pressure
control, and pressure measurement by a pressure gauge
4 metal reinforcement type "C" (below board)
5 Manufacturer's label
6 Yellow "WARNING" label
7 Inflatable seat
8 Front footrest (18×34) cm (below board)
9 Rear footrest (19×45) cm
10 Board
11 Handle
12 Waterproof zip
13 Safety rope
8
SEASHINE
- bottom
- seats, footrests etc.
TABLE OF CONTENTS:
1. Table of Specifications
2. Technical Description
3. Inflation Instructions
4. Using the Boat
5. Storage of the Boat
6. Treatment and Storage
7. Guarantee Conditions
8. Boat Repairs
9. Product Disposal Method
10. Packaging Disposal Method
11. Manufacturer's Label
– legend of symbols used
12. Safety Caution
65 × 55 × 33 [26 × 22 × 13]
72.5 × 55.5 × 32 [29 × 22 × 13]
0.025 MPa [0.25 Bar / 3.75 PSI]
0.05 MPa [0.5 Bar / 7.2 PSI]
0.02 MPa [0.2 Bar / 3 PSI]
1 4 Directional fin attachment
15 Anchor for the seat on the bottom
16 Seat and footrest (bottom) attachment anchor point on
rollers
17 Metal bracket with lug for attaching seat and footrest
18 Metal brace anchor point
19 Footrest attachment
20 Seat mounting strap
21 Foil reinforcement of the keel bottom
22 Plastic seat buckle
23 Mounting opening for rudder bracket (special accessory)
and Drainage opening
ACCESSORIES SUPPLIED WITH THE KAYAK:
Transportation bag, compression strap to pull down the
folded kayak User's Manual, foam sponge in a mesh bag,
gluing set containing glue, patches and valve adapter,
Skeg-fin, metal key for valves.
VERSION 4/2024
EN
Page 8
SEASHINE
470 [15-5]
83 [2-8]
3 + 2 + 2
19 [42]
250 [551]
3
15 [6]
36 [14]
8
9
9
10
10
10
10
10
10
10
11