4
OPERATION
q Updating the dashboard software version
The update of the dashbard software can only be
done by activating a Wi-Fi connection via the "MVride"
app installed on the Smartphone connected to the dash-
board (see §4.4.15). The availability of the Wi-Fi con-
nection is highlighted when the related symbol appears
on the upper portion of the display. N.B.: The update
process might take up to 15 minutes. It is recommended
to operate in an area with a good Wi-Fi coverage and
4
connect the charge maintainer to the vehicle to avoid
discharging the battery.
Press the " " (right) control until the "INFO" mode is
selected, then press "OK". The dashboard automatically
attempts to connect to Cloud to check for the availability
of new software updates.
Once the dashboard has connected to Cloud, it is
possible to download a new software version. If the new
version is the same as the one already installed on the
dashboard, the warning message shown in the picture
on the right appears on the display.
Press the " " (right) control until "DOWNLOAD
SOFTWARE" is selected, then press "OK" to download
the new software version.
- 81 -