4.4.5. "ABS" Mode
Press the " " (right) control until the "ABS" mode is
selected, then press "OK" for less than two seconds to
enable the modification of the anti-lock braking system
(ABS) mode. The current ABS mode is the same as the
one identified by the letter shown on the display.
WARNING
The anti-lock braking system (ABS) mode
4
may be changed or set when the engine is off,
the gear in neutral, the motorbike stationary
with your feet on the ground. Do not change
the display while driving.
By pressing the " " (right) control, the ABS moves to
the R mode ("Race"). On the other hand, by pressing
the " " (left) control, the ABS moves to the S mode
("Sport").
OPERATION
- 52 -
4