MV Agusta F3 800 R MY23 2023 Manual Del Usuario página 226

4.4.12. "LAUNCH CONTROL" Mode
Press the "Launch" button for more than two
seconds to activate the controlled vehicle start ("Launch
Control") function.
WARNING: The "LAUNCH CONTROL" func-
tion may be activated when the engine is on,
the gear in neutral, the motorbike stationary
with your feet on the ground.
NOTE: This function can only be enabled with:
- Traction Control (TC) set on 0 or 1
- Front Lift Control (FLC) set on 1 (active)
CAUTION: In order to preserve the integrity of
the clutch, the "LAUNCH CONTROL" function
calculates in real time the number of departu-
res that can be performed consecutively. This
number decreases by one unit at the comple-
tion of each start, and increases by one unit
based on the distance traveled by the vehicle
and the time spent with the engine running
and the engine off. The "LAUNCH CONTROL"
function allows you to make additional assi-
sted starts only when the number of residual
departures is greater than zero.
OPERATION
- 97 -
CAUTION
Using the "LAUNCH CONTROL"
function may reduce the life of the
mechanical parts of the engine and
transmission. It is recommended to
use the "LAUNCH CONTROL" func-
tion only when the engine has rea-
ched the operating temperature.
4
4