MV Agusta F3 800 R MY23 2023 Manual Del Usuario página 211

If the download cannot be completed due to pro-
blems on the Internet connection, the message shown
in the picture on the side appears on the display. Press
the " " (right) control until "DOWNLOAD AGAIN" is
selected, then press "OK" to attempt a new download.
If the download has been completed, it is possible to
update the dashboard software. Press the " " (right) con-
trol until "INSTALL SOFTWARE" is selected, then press
"OK" to install the new software version. N.B.: Do not
4
turn off the dashboard during the installation phase.
If the software installation has been correctly perfor-
med, "UPDATED" appears on the display. Turn the igni-
tion switch to "OFF" position, wait for 10 seconds at
least then turn it again to "ON" to activate the new
software version.
If the software installation has not been completed,
"UPDATE FAILED" appears on the display. Turn the
ignition switch to "OFF" position, then turn it again to
"ON" and repeat the procedure from the start.
When the updating procedure is finished, press the
" " (left) control to move to the "EXIT" selection and exit
the "INFO" mode.
OPERATION
- 82 -
4