Xylem SI Analytics TitroLine 7500 KF trace Manual De Instrucciones página 105

105
Fig. 26
The balance data can be entered using the front keyboard or an external keyboard. The input is to be confirmed
with <ENTER>/<OK>.
In the case of an automatic acceptance of the balance data, the weighed-in quantities will be read in from a
memory. If the memory does not contain any balance data, a message will appear to indicate that no balance
data are present (Fig. 27).
Fig. 27
Pressing the Print key will transfer the balance data, too. Titration will then begin directly after the transfer of the
balance data without any further confirmation being necessary. The display will show the µA-value, the drift value
and the current consumption. The top of the display will show the "Titration is running" status indication and the
method being used (Fig. 28).
Fig. 28
Pressing <F6> will cause the titration curve to be displayed (Fig. 29).