Xylem SI Analytics TitroLine 7500 KF trace Manual De Instrucciones página 91

2 Installation and Commissioning
2.1 Unpacking and setting up
The device has been put together especially for you (basic unit + corresponding modules and accessories), there
may be differences with respect to the delivery and the accessories described in this chapter. The scope of
delivery, please refer to the attached packing list. For any questions please contact us directly (see backside of
this operating manual).
The device itself as well as all related accessory and peripheral parts have been carefully checked at the factory
to ensure their correct function and size. Please ensure that the small accessories are also removed in full from
the packaging.
The device may be placed on any flat surface.
Scope of delivery:
a) Titrator TitroLine
 TitroLine
®
7500
 Keyboard TZ 3835
 Power supply TZ 1853 (100 V ... 240 V) incl. some primary adapter
 Connection cable for stirrer/pump TZ 1577
 Stand rod TZ 1748 (10 mm x 280 mm)
 Piston extraction tool TZ 3813
b) KF accessories
 KF starter kit TZ 1789 with molecular sieve, glass wool and a set of syringes with needles
 Electrode KF 1150
 For module 1 and 3 only:
Magnetic stirrer TM 235 and titration vessel TZ 1751
 For module 2 and 4 only:
KF titration stand (pump and stirrer) TM 235 KF with waste (1 L clear glass),
solvent (1 L amber glass) and bottle for the desiccant (100 ml) and with all PTFE and PVC hoses
Titration vessel TZ 1754
 For module 1 and 2:
Generator electrode TZ 1754 without diaphragm
 For module 3 and 4:
Generator electrode TZ 1753 with diaphragm
 For module 5:
Magnetic stirrer TM 235 and titration vessel TZ 1755
®
7500
91