Xylem SI Analytics TitroLine 7500 KF trace Manual De Instrucciones página 131

131
The parity can be selected amongst «No», «Even» and «Odd». «No» is the default setting (Fig. 91).
Fig. 91
You may select between 7 and 8 data bits. 8 bits is the default setting (Fig. 92).
Fig. 92
The RS232 parameters can be set to the factory settings.
The RS232-1 can be converted from RS on USB (Fig. 93 and Fig. 94).
In this case, the titrator via the USB PC connection to the PC is connected.
Fig. 93