English
Test bench MS005/MS005A
The diagnostic cable MS-33001 has the following adapting wire color codes (see also Table 1):
• Orange - S (Sense Pin) - the terminal that enables the measuring of the storage battery voltage
by the voltage regulator as well as it compares the storage battery voltage with the alternator
output voltage. This adapting cable is connected to terminal S;
• Red – IG (Ignition) – the terminal is used for the connection of the ignition circuit, the
terminals: 15, A, IG;
• White – FR – the terminal that transmits the data on the regulator load. This adapting wire is
connected to the following terminals: «FR», «DFM», «M»;
10
Figure 5. Universal diagnostic cable MS-33001
Figure 6. Adapting wire kit