MSG Equipment MS005 Manual De Usuario página 35

When switching to the starter diagnostic mode, the following information is displayed on the
screen (see Figure 29):
1 - Graph of measured parameters for the entire test duration.
2 - Graph of measured parameters at the moment of starter engagement.
3 - Display of the unit's temperature from the thermal imaging camera.
4 - Values changed one second after the start of the test.
5 - Current values.
6 - Test initiation buttons:
"MANUAL" - initiates the test in manual mode, the test lasts as long as the button is pressed;
"AUTO" - initiates the test in automatic mode, the test lasts for 2 seconds. After the test, a
report is generated.
"I AC, A" - Alternating current value in the B+ circuit (terminal 30).
"I DC, A" - Direct current value in the B+ circuit (terminal 30).
"U DC, V" - Voltage in the B+ circuit (terminal 30).
8. STARTER DIAGNOSTICS
Figure 29. Starter Testing Mode Menu
English
User manual
35