MSG Equipment MS005 Manual De Usuario página 20

English
Test bench MS005/MS005A
WARNING! Disassembly of the alternator is allowed only after the drive has completely
stopped, and the testing mode has been exited.
6.2. Connecting the diagnostic cable to the alternator
connector
To assess the operability of the alternator, it is necessary to select an appropriate special cable
or correctly connect the universal cable to the terminals in the alternator socket.
To select a special cable, go to the alternator database (see Fig. 17). Using the original alternator
number, which is often located on the housing or rear cover, search for the alternator in the
"Search" tab.
CAUTION! Diagnostics of alternators: Valeo "Stop-Start" 12 V system (alternator type IStars),
"I-ELOOP" (Mazda) and alternators without voltage regulator (alternator type F/67), is possible
only using a special cable (see appendix 1).
Figure 17
If the desired alternator is in the bench's database, its type, main characteristics, photo,
connection terminal designations, and the number of the required cable will be displayed. If the
desired alternator is in the bench's database, its type, main characteristics, photo, connection
terminal designations, and the number of the required cable will be displayed.
20