MSG Equipment MS005 Manual De Usuario página 37

7. Press and hold the "MANUAL" start button if manual diagnostics are required. We do not
recommend holding the button for more than 15 seconds to avoid damaging the starter.
8. Exit the diagnostic mode, after which the starter can be removed from the bench.
The bench is designed for a long operation life and doesn't have any special maintenance
requirements. At the same time, to ensure the maximum operation life, the regular monitoring of
bench technical condition should be made as follows:
• motor operation inspection (uncommon noises, vibration etc.);
• alternator drive belts condition (visual inspection);
• power wires condition (visual inspection);
• inspection of bench operation environment (temperature, humidity etc.).
Being connected to the Internet, with every switching on, the test bench checks for software
updates of diagnostics program, database and bench firmware. In case the bench finds the
software update at company server, you'll be offered to install the update or disregard it. To start
updating, press OK, to decline – SKIP.
ATTENTION! Updates may take a while to install.
WARNING! It's forbidden to switch off the bench supply to stop the updating.
Use soft tissues or wipe cloths to clean the surface of the device with neutral detergents. Clean
the display with a special fiber cloth and a cleaning spray for touch screens. To prevent corrosion,
failure, or damage to the test bench, do not use any abrasives or solvents.
9. TEST BENCH MAINTENANCE
9.1. Test bench firmware update
9.2. Cleaning and care
English
User manual
37