Transport, Storage And Handling; Machine Transport Conditions; Ambient Conditions In The Place Of Storage; Handling - SICE A 92 Manual De Instrucciones

These instructions are for the attention of persons with basic mechanical skills. We have
therefore condensed the descriptions of each operation by omitting detailed instructions
regarding, for example, how to loosen or tighten the fixing devices on the machine, etc. Do not
attempt to perform operations unless properly qualified and with suitable experience. In case of
need, please contact our nearest authorised Service Centre for assistance.
NOTE
All the installation operations must be carried out by Technical Service personnel authorised by
the producer.

TRANSPORT, STORAGE AND HANDLING

The aligner must be shipped in its original packing and stowed in the position indicated on the
outside.
• Packaging Data:
- Dimensions (LxWxH):
Complete measuring unit ........................................................................... 2770x880x660 mm
- Weight:
Measuring unit ............................................................................................................... 140 kg
Target ............................................................................................................................... 4 kg
• Relative humidity: 20% ÷ 80%
• Temperature range: -10° ÷ +60°C.
Do not stack other items on top of the packing to avoid damaging it.
To move the packing, insert the tines of a fork-lift truck into the slots on the base of the packing
itself (pallet).
Always use suitable hoisting belts or tested ropes.
This operation must be carried out very carefully to prevent the unit from tipping over or
being damaged.
Handle with care: violent vibrations may damage the equipment.

Machine transport conditions

Ambient conditions in the place of storage

WARNING

Handling

ATTENTION
WARNING
ATTENTION
50