Selecting Functions; Scrolling Items In A List; Setting An Option - SICE A 92 Manual De Instrucciones

The functions available in each program context are shown as special icons on a bar at the
bottom of the screen.
To select a specific function, press the key (from F1 to F10) indicated on the icon in question.
To facilitate and simplify the use of the machine, each key is generally associated with the same
type of command in the various program contexts.
In particular:
- F1 displays the on-line "Help".
- F2 equivalent to "Esc", goes back the previous window (except in the starting screen
where a password must be entered to shut down the program and switch control to
Windows
- F3 equivalent to "Enter", advances to the next window.
- F4 calls up a screen of status option settings, subdivided into logical groups. For
example: units of measurement, measurement data resolution, ...
The options shown are context-sensitive in relation to the point of the program in
which F4 is pressed.
- F10 returns to the starting screen. When pressed from the starting screen, this key exits
both the program and Windows
- F5 ÷ F9 have functions which may vary in the context of each specific program.
To scroll and select items from a list (menu), such as the databank, use the , arrow keys and
the Pag , Pag page up/down keys.
Sometimes the values in a table can be selected by scrolling up or down through the fields
provided using the F5 or F6 keys.
In some cases an item can be selected directly by typing its first letter.
To change the options in the screens called up by pressing the F4 key, use the "Tab", "Shift" +
"Tab" keys to move from one group of options to the next, and the ,
through the individual options within the selected group.
Press the F3 key to exit the Setup window and save the settings.
When the system then prompts confirmation of the choice made, you may:
- select F2 to not save the changes made
- select F3 to confirm the settings made
- select F4 to abort the saving procedure and remain in the set-up window.
The table below lists the various icons and their corresponding functions.
Each icon also indicates the associated function key.
SYMBOL
Invokes the on-line Help
Exits the on-line Help
Exits the aligner program and go to the Windows desktop (available only from the
starting screen)

Selecting functions

®
).

Scrolling items in a list

Setting an option

®
, in order to correctly switch off the PC.
FUNCTION DESCRIPTION
63
arrow keys to scroll