SICE A 92 Manual De Instrucciones página 65

Concludes adjustment of the vehicle axle with the wheels raised
Displays the next page, the windows which contain a large amount of information
are divided into pages. (E.g. On-line help, job record management, etc.)
Displays the Smart Card "Data Form" window (only available in the Diagnosis
window)
Displays the job record management window
Resets any steering wheel alignment correction values already in the memory
On/off function for maximum steering angle check. When the option is enabled
an icon displaying a turntable appears in the top right-hand corner of the heading
bar.
Prints the current window.
Switches between display of the caster, total toe and setback adjustment boxes.
(only available in the front axle adjustment window).
Switches between display of the camber, track difference and setback
adjustment boxes. (only available in the rear axle adjustment window).
Accesses and performs the procedure for update of the enabled programs, using
the smart card (in the service procedure)
Deletes the selected datum (a Make, Vehicle, Customer or Job)
Loads the data of the last job saved into the memory
No job available for loading into the memory
Increases the rim diameter measurement
Scrolls up to the next item in a list (only available in windows with a list of
options)
Displays the Make - Vehicle - Customer modification window
Transmits data between the PC and the (optional) chassis height and angle
measurement instrument.
65