Maintenance; Scrapping Info; Environmental Information - SICE A 92 Manual De Instrucciones

Keyboard connection cable is not inserted.
• Make sure the cable is inserted in the computer inside the aligner.
Faulty keyboard.
• Call the service centre.
Function key jammed (Alt, Alt Gr and Ctrl keys)
• Check all the keys and release as necessary.
The producer declines all liability for claims deriving from the use of non-original spares
or accessories.
Before making any adjustments or performing maintenance, disconnect the electrical
supply from the machine and make sure that all moving parts are suitably immobilised.
Do not remove or modify any parts of this machine except in the case of service
interventions.
Keep the working area clean.
Do not clean the machine with compressed air or jets of water.
When cleaning the area take steps to avoid raising dust as far as possible.
• Put back the targets with caution and in a dry place.
• Calibrate.
• Keep the turntables and the oscillating footboards on which the vehicle alignment is performed
perfectly clean and do not oil or grease them.
If the machine is to be scrapped, remove all electrical, electronic, plastic and metal components
and dispose of them separately, as provided for by local legislation (see figs. 31).
Following disposal procedure shall be exclusively applied to the machines having the crossed-
out bin symbol on their data plate.
This product may contain substances that can be hazardous to the environment or to human
health if it is not disposed of properly.
We therefore provide you with the following information to prevent releases of these substances
and to improve the use of natural resources.
Keyboard
Keyboard not accepting commands.

MAINTENANCE

ATTENTION

SCRAPPING INFO

ENVIRONMENTAL INFORMATION

WARNING
WARNING
86