To Charge A Mobile Device; Usb Charger On The Control Panel; Operation Speed; Control Panel - Husqvarna DURATIQ XP6 Manual Del Usuario

1. Connect the water hose to the water release
coupling on the product.
2. Use correct pressure and water flow. Refer to
Technical data on page 36 .

USB charger on the control panel

The USB charger on the control panel can be used to
charge mobile devices.
• To charge through the USB charger is only possible
when the ON/OFF button on the control panel is on.
• The mobile device continues to charge if the product
stops or the emergency stop button is engaged.
• The product does not set a time limit for how long a
mobile device can be charged. Charge your mobile
device as recommended by the manufacturer of the
mobile device.
• The USB charger supplies a maximum output of
10W.
1268 - 002 - 25.05.2020

To charge a mobile device

• Connect your mobile device to the USB charger.

Operation speed

If the product is operated on a new surface type, set the
speed to 70% initially. When the operator knows the
surface type, the speed can be adjusted.

Control panel

Operate the product manually with the control panel in
the handlebar. Refer to
6 , for an overview of the control panel buttons.

To start the product with control panel

1. Connect the propane tank. Refer to
disconnect the propane tank on page 18 .
2. Turn the battery switch clockwise.
Control panel overview on page
To connect and
19