Setting The Zigzag Stop Position - Brother E Serie Manual De Instrucciones

Ocultar thumbs Ver también para E Serie:
Tabla de contenido

Publicidad

7. USING THE OPERATION PANEL
7. VERWENDUNG DER BEDIENUNGSTAFEL
7. UTILISATION DU PANNEAU DE COMMANDE
7. USO DEL TABLERO DE CONTROLES

7-2-4. Setting the zigzag stop position

When the plain zigzag, 2-step zigzag, 3-step zigzag or scallop sewing patterns are selected, you can set whether the
needle stops when it is at the right side or the left side of the sewing pattern.
(If the right stopping has been set, the needle stop position will be the position shown by ◎ in the illustration below.)
* When the straight stitch, blind stitch or custom-made sewing patterns have been selected, the zigzag stop position
setting is ignored.
■ Sewing machine operation when sewing stops
When right stopping or left stopping is set, the sewing machine will keep running until the set position is reached, even
if the treadle is returned to the neutral position or depressed backward.
• For plain zigzag, 2-step zigzag and 3-step zigzag, the needle will stop at the stitch furthest to the right if right stopping
has been set, or at the stitch furthest to the left if left stopping has been set.
• For the scallop sewing pattern, the needle will stop at the next right-side stitch if right stopping has been set, or at the
next left-side stitch if left stopping has been set.
<Example: When right stopping has been set>
Treadle stopped
(Stop)
Plain zigzag
q
TEST
TEST
S E T
w
<Left stopping>
<No position specified>
t
83
3-step zigzag
1 2 3 4
5
6
7
8
PAT T ERN
PA
ERN
S
S
L
r
r
e
<Right stopping>
t
Scallop
1. If the LED display q is illuminated steadily, press the
SET key w so that the LED display q flashes.
2. Press the zigzag stop position key e.
The indicator r will illuminate, and the zigzag stop
position currently set will flash on the LED display q.
9
• === indicates that no stopping position has been
ROM
specified.
=++
indicates the left stopping position.
• ++= indicates the right stopping position.
3. Press the △ and ▽ selection keys t to change the zig-
zag stop position.
• Left stopping ................... Use the left △ and ▽ se-
• Right stopping ................ Use the right △ and ▽ se-
• No position specified ..... Use the middle △ and ▽
4. Once the setting is complete, press the SET key w.
The selected zigzag stop position will be accepted, and
the LED display q will stop flashing and illuminate
steadily.
* When setting another item in addition to the zigzag
stop position, you can press the SET key w after all
other settings have been completed to accept all of
the settings at once, instead of pressing the key at
this point. (Refer to page 66.)
■ Zigzag stop position indicator r
If the zigzag stop position has been set to right stopping
or left stopping, the zigzag stop position indicator r will
illuminate during sewing so that you can check whether
the zigzag stop position has been set to the right or the
left.
t
LZ2-B855E,B856E
* When the needle stops in the needle up stop
position, the last stitch does not form part
of the seam.
If the treadle is depressed backward at this
time, the seam is formed at that position.
lection keys t.
lection keys t.
selection keys t.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Lz2-b855eLz2-b856e

Tabla de contenido