Playback; Basic Playback - JVC TH-S3 Manual De Instrucciones

Playback

• The mark shows the types of discs the operation is available
for.
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press DVD.
The buttons described below are used on pages 16 to 19.
(play button)

Basic playback

1
Press OPEN/
CLOSE.
• The system turns on and the
AUDIO
•
2
Place a disc.
Label side up
3
Press 3 (play button).
For MP3/WMA
Remote control
The file control display (see page 24) appears on the TV screen.
mode selector
For JPEG
Each file (still pictures) is shown on the TV screen for about 3
seconds (slide-show). When stopping playback, the file control
display (see page 24) appears on the TV screen.
For MPEG4 disc
Pressing TOP MENU or MENU shows the file control display (see
page 24) on the TV screen during playback.
7 To pause
Press 8.
To return to playback, press
Number buttons
7 To stop
Press 7.
7 On-screen guide icons
During DVD VIDEO playback, the following guide icons may
appear for a while on the TV screen;
•
• : appears at the beginning of a scene containing multi-audio
• : appears at the beginning of a scene containing multi-angle
•
fast-reverse),
reverse): appears when you perform each operation.
•
NOTE
• (For JPEG) The system cannot accept operations even though you
press any buttons before the entire picture appears on the TV screen.
• If you do not want the on-screen guide icons to appear, see page 33.
disc tray comes out.
0 on the center unit functions same as OPEN/CLOSE on
the remote control.
When placing an 8 cm
(3 inches) disc
3 (play button).
: appears at the beginning of a scene containing multi-
subtitle languages.
languages.
views.
(Play), (Pause),
/
: the disc cannot accept an operation you have tried to do.
/ (Fast forward/
(Slow-motion forward/
16