Tuner Operations; Setting The Am Tuner Interval Spacing; Manual Tuning - JVC TH-S3 Manual De Instrucciones

Tuner operations

IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM.
The buttons described below are used on pages 35 and
36.
Setting the AM tuner
interval spacing
Some countries space AM stations 9 kHz apart, and some countries
use 10 kHz spacing.
You can only change the AM tuner interval spacing while
tuning into an AM station.
• You can operate the following procedures using the buttons on
the front panel.
7 To change the interval spacing into 9 kHz
Press 4 while holding down 7.
7 To change the interval spacing into 10 kHz
Press ¢ while holding down 7.
NOTE
• 10 kHz is the initial setting.
35

Manual tuning

AUDIO 1
Press FM/AM repeatedly to select the
band.
Example:
When the system is tuned in to 810 kHz.
2
Press TUNING 9/( repeatedly until
you find the frequency you want.
When you hold down the button until the system starts
searching for stations and then release it, the system stops
searching automatically when a station of sufficient signal
Remote control
mode selector
strength is tuned in to.
NOTE
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights on the display window.
• When an FM stereo program is received, the ST indicator lights on the
display window.
Number buttons
8 1 0 k