Chauvin Arnoux C.A 6030 Manual De Instrucciones página 72

PUSH
btn
>
88.88
88.88
88.88
PUSH
btn
=> If necessary, actvate alarm threshold I
4.4.3 Measurement procedure
The measurement is started automatically and is continuous.
4.4.4 Meausrement
The measured values and complementary calculated results are described in the table of § 4.1.4
( position of the switch).
4.4.5 Characteristics
4.4.5.1 Measurement ranges and accuracy
Pariculary reference conditions :
Characteristics with an MN 20 current probe :
Display range
Specified measurement
domain
Accuracy
Note : in measurement of I
nd
+
MORE
2
direction of alarm (> or<)
location of decimal point
setting of the value of each of the 4 digits,
selected by successive presses on the
key
.
ALARM
- peak factor = 1,414,
- DC component < 0,1%,
- operating frequency domain = 15.3 to 450Hz.
400mA
5.0-399.9mA
2%+10pt
, the accuracy is increased by 5%.
SEL
72
4A
0.400-3.999A 4.00-20.00A
1,5%+2pt 1,2%+2pt
40A