Safe Disposal Requirement; Inspection And Contents Checklist - Mettler Toledo IND780 Manual De Instalación

IND780 Installation Manual
IND780 is installed in an area classified as Division 2 or Zone 2/22, special AC
wiring requirements must be met. See document 64063214, IND780 Division 2,
Zone 2/22 Installation Guide.

Safe Disposal Requirement

Inspection and Contents Checklist

Verify the contents and inspect the package immediately upon delivery. If the
shipping container is damaged, check for internal damage and file a freight claim
with the carrier if necessary. If the container is not damaged, remove the IND780
terminal from its protective package, noting how it was packed, and inspect each
component for damage.
If shipping the terminal is required, it is best to use the original shipping container.
The IND780 terminal must be packed correctly to ensure its safe transportation.
The package should include:
IND780 Terminal
Installation manual
1-4
In conformance with the European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE) this device may not be
disposed of in domestic waste. This also applies to countries outside
the EU, per their specific requirements.
Please dispose of this product in accordance with local regulations at
the collecting point specified for electrical and electronic equipment.
If you have any questions, please contact the responsible authority or
the distributor from which you purchased this device.
Should this device be passed on to other parties (for private or
professional use), the content of this regulation must also be related.
Thank you for your contribution to environmental protection.
Documentation CD (includes all manuals)
Bag of parts including ferrites, grommets, etc.,
depending on terminal configuration