Plc Interface Modules; Devicenet Connections - Mettler Toledo IND780 Manual De Instalación

IND780 Installation Manual

PLC Interface Modules

DeviceNet Connections

The DeviceNet option board (Figure 2-61) is connected to the network by a
DeviceNet-specific twisted pair cable.
Figure 2-62 indicates the pin numbering of the DeviceNet Option Board connector.,
Wire colors and functions are detailed in Figure 2-63.
Consult
2-38
Figure 2-61: DeviceNet Option Board
1 2 3 4 5
Figure 2-62: DeviceNet Option Board Connector Pin Numbering
NOTES:
1. CONNECTION WITH 2 TWISTED PAIR SHIELDED CABLE
BELDEN 3082A OR 2083A OR EQUIVALENT.
2. REFER TO O.D.V.A. DEVICENET DOCUMENTATION FOR
OTHER CONSIDERATIONS.
3. WIRE SIZE: 14 AWG (2.088 mm2) MAXIMUM
Figure 2-63: DeviceNet Connector Wiring
http://www.odva.org/ for additional DeviceNet wiring information.
22 AWG (0.322 mm2) MINIMUM.