Mettler Toledo IND780 Manual De Instalación página 64

IND780 Installation Manual
The IDNet cable is required to connect between the option board and the enclosure
case. The cable is configured as shown in Figure 2-57.
Serial Option Board Connections
The Serial option board provides an extra COM port. The card can be placed in
slots 2 to 6 on the main PCB. The board is shown in Figure 2-58, and connector
pin assignments in Figure 2-59.
2-36
Figure 2-57: IDNet Cable for IDNet Option Board
Figure 2-58: Serial Option Board
Figure 2-59: Serial Option Board Connector