Rockwell (Allen Bradley) Rio Connections; Pcb Switch Settings; Main Pcb Switches - Mettler Toledo IND780 Manual De Instalación

IND780 Installation Manual

Rockwell (Allen Bradley) RIO Connections

Connections to the Remote IO option are made using a three-pin terminal
connector on the RIO option. The connection should be wired as shown in Figure
2-75.
Figure 2-75: RIO Connection Wiring
The part number for the Remote IO cable is Belden 9463. It is sometimes referred
to as "Blue Hose" cable.
Figure 2-76 shows the RIO PLC interface module, with its connector at upper right.
Figure 2-76: Allen Bradley RIO PLC Interface Module

PCB Switch Settings

PCB switch settings are described in this section, including settings for main PCB
switches and the discrete I/O (relay) switch.

Main PCB Switches

There are two switches located on the main PCB, in the positions indicated in
Figure 2-77. Functions of the switches are listed in Table 2-8.
2-43