Assembling The Device - Mettler Toledo LV12 Instrucciones De Manejo

Observe the ambient conditions:
The instrument must only be used indoors and up to a
•
maximum altitude of 5000 m above sea level.
Temperature range: 10–30 °C
•
Humidity: max. 80 % noncondensing
•
Pay attention the following:
The power plug must be accessible at all times.
•
Firm, horizontal and vibration-free location.
•
Avoid excessive temperature fluctuations.
•
Avoid direct sunlight.
•
No powerful drafts (e. g. from fans or air conditioners).
•

3.4 Assembling the device

After checking the scope of delivery, unpacking the device and after finding a proper location, the
device must be assembled.
1 Remove the four transportation locks (1) (one in each
corner).
2 Put the feeder plate (2) on the device and fix it by turning it
clockwise along the slotted holes.
Automatic Feeder Installation and Putting into Operation 11
1
2