Cooling System
Radiator Coolant
To ensure that the coolant maintains its ability to protect the engine, we
recommend that the system be completely drained every five (5) years
and fresh Antifreeze 50/50 Premix added.
Any time the cooling system has been drained for maintenance or repair,
replace the coolant with fresh Antifreeze 50/50 Premix.
If the recovery bottle has run dry, check the level in the radiator. Add
coolant as needed.
Escaping steam can cause severe burns. Never remove the pressure cap while
the engine is warm or hot.
1. Open the front box cover.
2. Remove the access panel
screws. Squeeze the outer
edges of the panel inward to
remove the panel.
3. Remove the pressure cap.
4. Using a funnel, slowly add
coolant through the radiator
filler neck.
5. Reinstall the pressure cap.
Use of a non-standard pressure cap will not allow the recovery
system to function properly. Contact your dealer for the correct
replacement part.
6. Reinstall the access panel and secure the front box cover.
MAINTENANCE
Radiator Cap
105