Polaris Sportsman 450 HO Manual Del Propietário página 39

Instrument Cluster
Digital/Analog Gauge
Indicator Lamps
Lamp Indicates
Vehicle
Speed
Over
Temperature
EPS Warning
(if equipped)
High Beam
Check Engine This indicator appears if an EFI-related fault occurs.
Turn Signal
Trailer Turn
Signal
Brake Failure This icon will illuminate if the vehicle sensors detect a
FEATURES AND CONTROLS
When standard mode is selected, speed displays in
miles per hour.
When metric mode is selected, speed displays in
kilometers per hour.
This lamp flashes to indicate an overheated engine. If
the indicator stops flashing but remains illuminated,
the overheating condition remains, and the system
will automatically reduce engine power.
This indicator illuminates when the key is turned to
the ON position and goes off when the engine is
started. If the light remains on after starting the
engine, the EPS system is inoperative. See your
authorized POLARIS dealer for service.
This lamp illuminates when the headlamp switch is
set to high beam.
Do not operate the ATV if this warning appears.
Serious engine damage could result. See your dealer.
The corresponding turn signal indicator flashes when
the left, right or both turn signals (hazard warning) are
active.
The corresponding turn signal indicator flashes when
the trailer light harness is properly connected to the
vehicle and a left or right turn signal is active.
malfunction in the brake system.
Condition
39