Open Dilution Programming - 3M 6502 Manual Del Usuario

6.7 Open Dilution Programming

1. Press repeatedly until the display reads:
2. Press to enter selection.
The display shows the last used setting for the diluent aspiration volume.
3. Press to select a new diluent volume (0.05-1.00 mL).
(In this case 0.70 mL).
4. Press to enter selection.
The display shows the last used setting for the sample aspiration volume.
5. Press to select a new sample volume. (In this case 0.30 mL).
6. Press to enter selection.
7. Attach the tip to the tip cone.
The pipettor is now ready to begin the dilution. The display indicates that the
pipettor is ready to aspirate the selected diluent volume.
8. Place the tip in the diluent and press the Start-button. The unit will aspirate the diluent volume (0.70 mL) selected.
d0
SPEC mL
1 0.60 mL
1 0.70 mL
1 0.60 mL
2 0.30 mL
d0
1 0.70 mL
5
SPEED
IN
11
(English)