Wilo Stratos GIGA Serie Instrucciones De Instalación Y Funcionamiento página 42

English
12.3
Fig. 39: Setting with return to the
status page
8.6.5 Calling up information
12.3
Fig. 40: Calling up information
8.6.6 Activating/deactivating service
mode
36
±
2.0.0.0
2.0.0.0
2.0.0.0
2.0.0.0
4.1.1.0
4.1.0.0
5,4
H/m
4.1.3.0
320
P/W
NOTE:
When values are changed under <1.0.0.0>, <2.0.0.0> and <3.0.0.0>,
<5.7.7.0> and <6.0.0.0>, the display jumps back to the status page
(Fig. 39).
Changes cannot be made in "Information" menu elements. These are
identified on the display by the default "access disable" symbol. To
call up current settings, proceed as follows:
• Navigate to the desired "Information" menu element (<4.1.1.0> in the
example).
The current value or state of the setting and the associated symbol
are displayed. Pressing the red button has no effect.
• Turn the red button to access the "Information" menu elements in the
current sub-menu (see Fig. 40). For an explanation of the settings
represented by the symbols, see the table in chapter 8.7 "Menu ele-
ments reference" on page 37.
• Turn the red button until the "One level up" menu element is dis-
played.
• Press the red button.
The display returns to the next higher menu level (<4.1.0.0> here).
Additional settings can be made in service mode. The mode is acti-
vated or deactivated as follows.
CAUTION! Danger of property damage!
Improper setting changes can lead to pump operation errors,
which can lead to property damage to the pump or system.
• Settings in service mode should only be made during commis-
sioning and only by qualified personnel.
ON
• Set DIP switch 1 to the 'ON' position.
Service mode is activated. The symbol shown here flashes on the sta-
1
tus page.
The sub-elements of menu 5.0.0.0 switch from the "Information"
element type to the "Selection/setting" element type, and the stan-
dard "access disable" symbol (see symbol) is hidden for the respective
elements (except for <5.3.1.0>).
The values and settings for these elements can now be edited.
• To deactivate, return the switch to its starting position.
WILO SE 01/2014