Cleaning Tubing; Cleaning The Motor Unit - Medela Swing Flex Instrucciones De Uso

6.5 Cleaning tubing

1
• No visible residues
No cleaning needed.
• With visible residues
1. Rinse tubing in cool water
2. Wash tubing in warm, soapy water
3. Rinse tubing with clear water
4. Shake out water droplets
5. Hang to air dry
Do not sanitise the tubing.

6.6 Cleaning the motor unit

1
To clean the motor unit, wipe the housing
with a clean, damp (not wet) cloth. You may
use drinking-quality water and a basic
washing-up liquid or a non-abrasive
detergent.
Note
• If the individual components of the pump
set are cleaned in a dishwasher, parts
may be discoloured by food pigments.
This has no impact on the function.
• The membrane at the connector prevents
the milk from flowing into the tubing,
however, inspect the tubing after each
pumping session for visible residues. If
there are visible residues in the tubing,
follow the instructions in chapter 6.5.
2
Additionally you may use an alcohol-based
disinfecting agent.
15